The processing method of rigid flange coupling is a mystery to customers. The manufacturer will reveal the answer for you. We have produced rigid flange coupling for many years and are a better manufacturer in the market. We have the right to speak for rigid flange coupling.

Rigid flange coupling process:

After boring and passing the inspection, the keyway of the coupling can be processed, and the processing is carried out on a slotting machine. A margin of 0.1 mm should be left on each side of the coupling for post-correction by the fitter, in the middle mainly to ensure that the machined keyway wall can be parallel to the center line of the hole. Couplings produced in batches are generally scraped and inspected with a special sample as the standard, and the couplings produced in a single piece can be trimmed and scraped while assembling to achieve accurate matching dimensions.

The end face processing of the coupling is often carried out on the shaft. This is to make the tenon on the end face of the coupling accurately concentric with the center line of the shaft. In this processing process, special attention should be paid to the end face of the coupling and the rotor. At the same time, attention should be paid to whether the mutual cooperation of the centering tenons meets the requirements. For flanged couplings without centering tenons, the two coupling halves should be fitted together for reaming after drilling.

Summarize:

As a manufacturer of rigid flange couplings, it has always been outstanding in the same industry with ultra-high technical standards and excellent product quality, and has gained a firm foothold and won unanimous praise from customers. People are constantly spreading products, so that they have greater charm in the market.