Do you really understand the drum gear coupling in the daily operation of the work how to maintain and maintenance? The manufacturer believes that we should not be particularly clear about this kind of thing, the following will be the relevant technical personnel of the manufacturer to introduce it in detail.

Drum gear coupling maintenance and maintenance:

1. Before installation, the end faces of the two axes should be cleaned and the matching conditions of the end keyway should be checked;

2, after installation, normally run a shift, need to check all screws, such as loose, timely tighten, so repeated several shifts, to ensure that it will not loose;

3. In order to prevent freting wear of the diaphragm at high speed, resulting in micro-cracks and damage to the bolt holes of the diaphragm, solid lubricants such as molybdenum disulfide can be coated between the diaphragm or the surface of the diaphragm for wear reduction coating treatment;

4. Long-term overload use and operation accidents should be avoided;

5, in the work operation, should often check the drum gear coupling maintenance and maintenance is abnormal phenomenon, if abnormal phenomenon occurs, need to be repaired in time;

6. Appropriate safety protection measures should be taken in various sites where personal and equipment accidents may be caused by the running coupling.

For the correct installation of the drum gear coupling bolt direction is a key link, we must remember not to install and drop every small parts even including the spring washer, so as to make the bolt assembly play its excellent performance, will not make the other parts of the drum gear coupling damaged.